One-Piece, Male NPT Crimp Fitting
Minotaur Hose Fittings
ONE PIECE CRIMP SPECIFICATIONS
- Do not crimp entire length of ferrule. Measure crimp length from bottom up. Do not crimp past bottom of marking.
- Verify crimp diameter by measuring across the lowest point (not over ridges).
Part Number |
Hose Series |
Hose ID |
Crimp Diameter (in) ± 0.005 |
Crimp Diameter (mm) ± 0.1 |
Crimp Length (in) ± 0.010 |
Insert Depth (in) ± 0.063 |
Die Size |
Micrometer Setting |
|---|---|---|---|---|---|---|---|---|
| FHP08NPT8 | Hose Series N/A MNTR-050 | Hose ID N/A 1/2 in | Crimp Diameter (in) ± 0.005 N/A 0.940 in | Crimp Diameter (mm) ± 0.1 N/A 23.9 mm | Crimp Length (in) ± 0.010 N/A 1.300 in | Insert Depth (in) ± 0.063 N/A 1.500 in | Die Size N/A 22 mm | Micrometer Setting N/A 1.9 mm |
| FAR12NPT12 | Hose Series N/A MNTR-075 | Hose ID N/A 3/4 in | Crimp Diameter (in) ± 0.005 N/A 1.250 in | Crimp Diameter (mm) ± 0.1 N/A 31.8 mm | Crimp Length (in) ± 0.010 N/A 1.475 in | Insert Depth (in) ± 0.063 N/A 1.750 in | Die Size N/A 29 mm | Micrometer Setting N/A 2.8 mm |
| FAR16NPT16 | Hose Series N/A MNTR-100 | Hose ID N/A 1 in | Crimp Diameter (in) ± 0.005 N/A 1.530 in | Crimp Diameter (mm) ± 0.1 N/A 38.9 mm | Crimp Length (in) ± 0.010 N/A 2.000 in | Insert Depth (in) ± 0.063 N/A 2.000 in | Die Size N/A 38 mm | Micrometer Setting N/A 0.9 mm |
